Ph. 07 5551 0235
Search site
Sort   
Pages: [1]
Viewing page 1 of 1
The Pipe Clamp Hose Holder
Item # TS-PCHH

The Pipe Clamp Hose Holder

Suitable for tubes 12mm-16mm thick
  • The pipe clamp is perfect for holding hose over the edge of a tank.
  • Suitable for glass up to 10mm.
  • Will hold up to 16mm hose.
  • Excellent for assisting with water ...
More info...

Your Price AU$4.60
Aquarium Bulkhead with O Ring ABS 20mm Inner Dia Thread
Item # AP-BH-1/2

Aquarium Bulkhead with O Ring ABS 20mm Inner Dia Thread

Premium compact bulkhead Slip-Thread Type (1/2inch)
  • Overall size: 46mm dia
  • Diameter is measured as internal sizing
  • Made from ABS Plastic
  • Recommended to use "Transition Cement" (normally green in colour) if gluing to PVC ...
More info...

Your Price AU$10.45
Earn 104 points
Aquarium Bulkhead with O Ring ABS 25mm Inner Dia Thread
Item # AP-BH-3/4

Aquarium Bulkhead with O Ring ABS 25mm Inner Dia Thread

Premium compact bulkhead Slip-Thread Type (3/4inch)
  • Overall size: 57.3mm dia
  • Diameter is measured as internal sizing
  • Made from ABS Plastic
  • Recommended to use "Transition Cement" (normally green in colour) if gluing to ...
More info...
Out of stock
Your Price AU$15.70
Earn 157 points
Aquarium Bulkhead with O Ring ABS 32mm Inner Dia Thread
Item # AP-BH-1

Aquarium Bulkhead with O Ring ABS 32mm Inner Dia Thread

Premium compact bulkhead Slip-Thread Type (1inch)
  • Overall size: 73.3mm dia
  • Diameter is measured as internal sizing
  • Made from ABS Plastic
  • Recommended to use "Transition Cement" (normally green in colour) if gluing to ...
More info...

Your Price AU$18.00
Earn 180 points
Aquarium Bulkhead with O Ring ABS 48mm Inner Dia Thread
Item # AP-BH-1.5

Aquarium Bulkhead with O Ring ABS 48mm Inner Dia Thread

Premium compact bulkhead Slip-Thread Type (1.5inch)
  • Overall size: 97.5mm dia
  • Diameter is measured as internal sizing
  • Made from ABS Plastic
  • Recommended to use "Transition Cement" (normally green in colour) if gluing to ...
More info...

Your Price AU$21.95
Earn 220 points
Aquarium Bulkhead with O Ring ABS 60mm Inner Dia Thread
Item # AP-BH-2

Aquarium Bulkhead with O Ring ABS 60mm Inner Dia Thread

Premium compact bulkhead Slip-Thread Type (2inch)
  • Overall size: 94mm dia
  • Diameter is measured as internal sizing
  • Made from ABS Plastic
  • Recommended to use "Transition Cement" (normally green in colour) ...
More info...

Your Price AU$24.90
Earn 249 points
Acrylic Lid Bracket 6mm
Item # MX-ALB-6

Acrylic Lid Bracket 6mm

1 piece to suit 5-6mm glass

Your Price AU$2.95
Acrylic Lid Bracket 8mm
Item # MX-ALB-8

Acrylic Lid Bracket 8mm

1 piece to suit 8mm glass

Your Price AU$3.60
Acrylic Lid Bracket 10mm
Item # MX-ALB-10

Acrylic Lid Bracket 10mm

1 piece to suit 10mm glass

Your Price AU$3.90
Aquarium Bulkhead Kit
Item # GPS-BH32-KIT

Aquarium Bulkhead Kit

Compact bulk head 32mm (Slip-in Type)
  • Made from moulded, impact resistant PVC.
  • Comes with elbow straight piece and strainer slip fittings.
  • Threaded fitting on outside.
  • 32mm Bulkhead fitting with rubber ...
More info...

Your Price AU$29.70
Earn 297 points
Aquarium Barbed In Line Tap 19mm
Item # INT-19

Aquarium Barbed In Line Tap 19mm

Suitable for 19mm hose.
Out of stock
Your Price AU$9.95
Earn 100 points
Aquarium Barbed In Line Tap 25mm
Item # INT-25

Aquarium Barbed In Line Tap 25mm

Suitable for 25mm hose.

Your Price AU$10.95
Earn 100 points
Aquarium Bulkhead with O Ring PVC 26.75mm Inner Diameter
Item # 270590BK

Aquarium Bulkhead with O Ring PVC 26.75mm Inner Diameter

Compact bulkhead (#R270590) Slip-Slip Type
  • Made from moulded, impact resistant PVC.
  • Elbows and strainers also available in slip fittings.
  • Threaded fitting on outside.
  • Passes water through sides or bottom of ...
More info...

Your Price AU$13.95
Earn 140 points
Aquarium Bulkhead with O Ring PVC 33.55mm Inner Dia
Item # 270577BK

Aquarium Bulkhead with O Ring PVC 33.55mm Inner Dia

Compact bulkhead (#R270577) Slip-Slip Type
  • Made from moulded, impact resistant PVC.
  • Elbows and strainers also available in slip fittings.
  • Threaded fitting on outside.
  • Passes water through sides or bottom of ...
More info...

Your Price AU$13.70
Earn 137 points
Diamond Coated Glass Hole Saw 22mm - 7/8inch
Item # H/S-22

Diamond Coated Glass Hole Saw 22mm - 7/8inch

Suitable for 15mm Bulkhead Treasure Limited
  • Diamond Coated hole saw.
  • Suitable for glass, tile and ceramic.
  • 22mm (7/8") diameter hole size.
  • Suitable for standard 15mm bulkhead fitting.
  • Made in Hong ...
More info...

Your Price AU$12.50
Diamond Coated Glass Hole Saw 28mm - 1 1/8inch
Item # H/S-28

Diamond Coated Glass Hole Saw 28mm - 1 1/8inch

Suitable for 20/25mm Bulkhead Treasure Limited
  • Diamond Coated hole saw.
  • Suitable for glass, tile and ceramic.
  • 28mm (1 1/8") diameter hole size.
  • Suitable for standard 20mm bulkhead fitting.
  • Made in Hong ...
More info...

Your Price AU$17.85
Diamond Coated Glass Hole Saw 35mm - 1 3/8inch
Item # H/S-35

Diamond Coated Glass Hole Saw 35mm - 1 3/8inch

Suitable for 25mm Bulkhead Treasure Limited
  • Diamond Coated hole saw.
  • Suitable for glass, tile and ceramic.
  • 35mm (1 3/8") diameter hole size.
  • Suitable for standard 25mm bulkhead fitting.
  • Made in Hong ...
More info...

Your Price AU$24.95
Diamond Coated Glass Hole Saw 42mm - 1 2/3inch
Item # H/S-42

Diamond Coated Glass Hole Saw 42mm - 1 2/3inch

Suitable for 32mm Bulkhead Treasure Limited
  • Diamond Coated hole saw.
  • Suitable for glass, tile and ceramic.
  • 42mm (1 2/3") diameter hole size.
  • Suitable for standard 32mm bulkhead fitting.
  • Made in Hong ...
More info...

Your Price AU$25.95
Diamond Coated Glass Hole Saw 45mm - 1 3/4inch
Item # H/S-45

Diamond Coated Glass Hole Saw 45mm - 1 3/4inch

Suitable for some 32mm Bulkheads Treasure Limited
  • Diamond Coated hole saw.
  • Suitable for glass, tile and ceramic.
  • 45mm (1.75") diameter hole size.
  • Suitable for standard 40mm bulkhead fitting.
  • Made in Hong ...
More info...

Your Price AU$28.05
Diamond Coated Glass Hole Saw 50mm - 2inch
Item # H/S-50

Diamond Coated Glass Hole Saw 50mm - 2inch

Suitable for 40mm Bulkhead Treasure Limited
  • Diamond Coated hole saw.
  • Suitable for glass, tile and ceramic.
  • 50mm (2") diameter hole size.
  • Suitable for standard 40mm bulkhead fitting.
  • Made in Hong ...
More info...

Your Price AU$29.95
Diamond Coated Glass Hole Saw 60mm - 2 3/8inch
Item # H/S-60

Diamond Coated Glass Hole Saw 60mm - 2 3/8inch

Suitable for 50mm Bulkhead Treasure Limited
  • Diamond Coated hole saw.
  • Suitable for glass, tile and ceramic.
  • 60mm (2 3/8") diameter hole size.
  • Suitable for standard 50mm bulkhead fitting.
  • Made in Hong ...
More info...

Your Price AU$32.95
Flow Accelerator Duck Bill 1/2 inch 13mm Inner Diameter
Item # GPS-DA/15

Flow Accelerator Duck Bill 1/2 inch 13mm Inner Diameter

19mm Outer dia thread. Outlet with fanned end

Flow accelerators are designed to add increased and varied directional flow patterns to aquariums. When used as the plumbing return fitting these units greatly enhance your aquariums flow.

    More info...

    Your Price AU$23.95
Flow Accelerator Duck Bill 3/4 inch 19mm Inner Diameter
Item # GPS-DA/19

Flow Accelerator Duck Bill 3/4 inch 19mm Inner Diameter

25mm Outer dia thread. Outlet with fanned end

Flow accelerators are designed to add increased and varied directional flow patterns to aquariums. When used as the plumbing return fitting these units greatly enhance your aquariums flow.

    More info...

    Your Price AU$26.20
Flow Accelerator Duck Bill 1 inch 25mm Inner Diameter
Item # GPS-DA/25

Flow Accelerator Duck Bill 1 inch 25mm Inner Diameter

32mm Outer dia thread. Outlet with fanned end
  • Flow Accelerator with fanned end (Duck Bill)
  • Suitable 25mm pipe
  • Adjustable via 2 ball joints similar to Line-Loc
  • 60mm wide fan outlet
  • Increases ...More info...
    New stock on order
    Your Price AU$24.95
Adjustable Float Valve Mini 135mm
Item # FV-1

Adjustable Float Valve Mini 135mm

Perfect for Auto Top Up Systems
  • Adjustable and compact
  • Can be used for drinking water
  • 135x40x40mm


Your Price AU$4.50
Earn 45 points
Adjustable Float Valve Small 145mm
Item # FV-2

Adjustable Float Valve Small 145mm

Perfect for Auto Top Up Systems
  • Adjustable and compact
  • Can be used for drinking water
  • 145x40x40mm overall size

Your Price AU$5.95
Earn 60 points
Filter Hose Clamp Steel 13mm
Item # XY-FHC-13M

Filter Hose Clamp Steel 13mm

Suit Hose 15-18mm
  • Steel hose clamp
  • Suit hose 12-16mm

Your Price AU$4.95
(Was AU$6.95 you save AU$2.00
Filter Hose Clamp Steel 17mm
Item # XY-FHC-17M

Filter Hose Clamp Steel 17mm

Suit Hose 20-24mm
  • Steel hose clamp
  • Suit hose 16-22mm

Your Price AU$4.95
(Was AU$6.95 you save AU$2.00
Aquarium 32mm Threaded Bulkhead 20mm dia outlet
Item # BHEL3220

Aquarium 32mm Threaded Bulkhead 20mm dia outlet

90 degree elbow
  • Made from moulded, impact resistant PVC.
  • 32mm Bulkhead fitting with rubber washers
  • Suit hole size: 33mm - 38mm (internal size diameter 25mm)

Your Price AU$13.90
Earn 139 points
Aquarium 32mm Threaded Bulkhead 25mm dia outlet
Item # BHEL3225

Aquarium 32mm Threaded Bulkhead 25mm dia outlet

90 degree elbow
  • Made from moulded, impact resistant PVC.
  • 32mm Bulkhead fitting with rubber washers
  • Suit hole size: 33mm - 38mm (internal size diameter 25mm)
Out of stock
Your Price AU$14.95
Earn 150 points
Aquarium Bulkhead with O Ring 20mm Inner Dia
Item # GPS-BH/20

Aquarium Bulkhead with O Ring 20mm Inner Dia

Slip-in Type
  • Made from moulded, impact resistant PVC.
  • 20mm Bulkhead fitting with rubber washers
  • Suit hole size: 20mm - 25mm (internal threaded section size diameter ...More info...

    Your Price AU$13.90
    Earn 139 points
Aquarium Bulkhead with O Ring 25mm Inner Dia
Item # GPS-BH/25

Aquarium Bulkhead with O Ring 25mm Inner Dia

Slip-in Type
  • Made from moulded, impact resistant PVC.
  • 25mm Bulkhead fitting with rubber washers
  • Suit hole size: 26mm - 30mm (internal threaded section size diameter ...More info...

    Your Price AU$18.70
    Earn 187 points
Aquarium Bulkhead with O Ring 32mm Inner Dia
Item # GPS-BH/32

Aquarium Bulkhead with O Ring 32mm Inner Dia

Slip-in Type
  • Made from moulded, impact resistant PVC.
  • 25mm Bulkhead fitting with rubber washers
  • Hole size: 32mm - 37mm
  • Suit hole size: 32mm - 37mm (internal threaded section size ...
More info...

Your Price AU$20.60
Earn 206 points
Stainless Steel Lid Bracket 6mm
Item # XY-SSS-6M

Stainless Steel Lid Bracket 6mm

4 pieces *** PACKAGING MAY VARY ***
  • Stainless Steel Lid Brackets for use on Frameless Aquariums.  Comes in a set of 4 pieces, one for each corner of the tank.
  • Size: Suitable for tanks with 6mm glass
  • Glass lid not ...
More info...

Your Price AU$13.95
Stainless Steel Lid Bracket 8mm
Item # XY-SSS-8M

Stainless Steel Lid Bracket 8mm

4 pieces
  • Stainless Steel Lid Brackets for use on Frameless Aquariums. Comes in a set of 4 pieces, one for each corner of the tank.
  • Size: Suitable for tanks with 10mm glass
  • Glass lid not ...
More info...

Your Price AU$14.30
Stainless Steel Lid Bracket 10mm
Item # XY-SSS-10M

Stainless Steel Lid Bracket 10mm

4 pieces
  • Stainless Steel Lid Brackets for use on Frameless Aquariums. Comes in a set of 4 pieces, one for each corner of the tank.
  • Size: Suitable for tanks with 10mm glass
  • Glass lid not ...
More info...

Your Price AU$15.95
Odyssea U-Bend Return Pipe 19-25mm
Item # UTube-19/25

Odyssea U-Bend Return Pipe 19-25mm

U-Tube Return Pipe with Outlet
  • U-Bend outflow pipe with fanned end.
  • Suits 19-25mm pipe.
  • Adjustable outflow via 2 ball joints.
  • Can fit over to 50mm wide bracing.
  • External down pipe ...
More info...
New stock expected Early February
Your Price AU$20.65
Flow Accelerator Vortex Type 25mm Outer dia thread
Item # AP-S-VA-3/4

Flow Accelerator Vortex Type 25mm Outer dia thread

19mm Inner (3/4 inch) Diameter

Flow accelerators are designed to add increased and varied directional flow patterns to aquariums. When used as the plumbing return fitting these units greatly enhance your aquariums flow.

< ...More info...
Out of stock
Your Price AU$23.95
Flow Accelerator Vortex Type Small
Item # TS-VA-20mm

Flow Accelerator Vortex Type Small

18mm Inner Dia Slip on style

Flow accelerators are designed to add increased and varied directional flow patterns to aquariums. When used as the plumbing return fitting these units greatly enhance your aquariums flow.


Your Price AU$9.95
Flow Accelerator Vortex Type 32mm Outer dia thread
Item # AP-S-VA-1

Flow Accelerator Vortex Type 32mm Outer dia thread

23mm Inner (1 inch) Diameter

Flow accelerators are designed to add increased and varied directional flow patterns to aquariums. When used as the plumbing return fitting these units greatly enhance your aquariums flow.

    More info...
    Out of stock
    Your Price AU$23.80
Pages: [1]
Viewing page 1 of 1
Copyright (c) 2021 The Aquarium Shop All rights reserved.